RoadLink – Wolf Tooth Components

    28

    The RouteLink™  derailleur hanger extension is a unique patented device that offsets the position of your Route derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution pour riders looking to convert their Route, gravel, cyclocross, or commuter drivetrain bike to attain the simplicity and reduced weight of a single front Couronne but without giving up the gear range of a double. It is also great pour riders with double Couronne bikes that want lower gearing pour those ultra steep climbs. It does not compromise the shifting in the smaller cogs of the cassette but yet it enables the derailleur to work with as large as a 40T cassette. Easily installed in less than 5 minutes by any home mechanic. The RouteLink  mounts only to standard derailleur hangers.   NOTERouteLink repositions your derailleur to provide clearance pour larger cassette cogs but it does not increase derailleur capacity. It is critical to find and understand your derailleur’s capacity before attempting to expand its gear range.      The RouteLink™   is optimized pour use with 10 or 11-speed 11-36t and 11-40t cassettes and work great with Wolf Tooth’s 40-tooth GC cassette extenders and Drop-Stop Couronnes. The RouteLink  is optimized around Shimano Route derailleurs. It works great pour Route, cyclocross, touring, commuting, and drop-bar mountain bikes. Compatibility10s Cassette Compatibility: 11-32: Not Required (GS medium cage rear derailleur works)  11-34: Single (pour double Couronne be sure to not exceed the derailleur’s capacity) 11-36: Single (pour double Couronne be sure to not exceed the derailleur’s capacity) 11-40: Single (pour double Couronne be sure to not exceed the derailleur’s capacity) 11-42: Not supported 11s Cassette Compatibility: 11-32: Not Required (GS medium cage rear derailleur works) 11-34: Single (pour double Couronne be sure to not exceed the derailleur’s capacity) 11-36: Single (pour double Couronne be sure to not exceed the derailleur’s capacity) 11-40: Single (pour double Couronne be sure to not exceed the derailleur’s capacity) 11-42: Not supported 10-42: Not supported Double Couronnes are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the rear derailleurs capacity is not exceeded. The RouteLink™   mounts only to standard derailleur hangers. The RouteLink™  is optimized pour the 10- and 11-speed Shimano Route derailleur geometry. It also works very well with 9-speed Route derailleurs. Traditional SRAM derailleurs work but not the 1x specific X-HORIZON rear derailleurs. Campy derailleurs work best with cassettes up to 11-36. SRAMs Exact Actuation Route shifters (10s and 11s) are interchangeable with their Exact Actuation mountain derailleurs – which can easily handle a 36 or 40 (and, pour 1x, are available with a clutch) – and the CX1 will go even bigger with a single ring. If you already have SRAM, they also make nice front brake-only levers that match their rear shifters too.  Triple Couronnes are   not supported (medium cage rear derailleurs cannot accommodate that big of a range). Direct Mount-native frames are   not supported .   Due to the lack of a clutch mechanism on Shimano Route derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially pour rough or off-Route use. Due to variations in derailleur hanger geometry, chainstay length, Couronne size, B-screw adjustment, and suspension configuration, individual results will vary. This 7.9mm max dimension is controlled by the Shimano spec, but a few derailleur hangers don’t meet the spec. You can file a bit of the bottom “tang” of those derailleur hangers to install the RouteLink™. RecommendationsMost applications will use our 110 BCD, 130 BCD, 104 BCD, or direct mount CX/Couronne Routes (pour Cannondale or SRAM). If you are looking to expand beyond the 11-36t range of a typical 10-speed mountain bike cassette, check out our GC40 and 16t cog   Related ProductsDrop-Stop Couronnes   Tech SpecsWeight:  17g Material:  6061 aluminum Included:  stainless steel bolt Torque:  8-10Nm Made in the USA WARNING Handling this product will expose you to chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. pour further information go to www.P65Warnings.ca.gov.​ Patent and trademark information

    Disponible sur commande

    WT-Roadlink-01
    RoadLink – Wolf Tooth Components

    28