CAMO Direct Mount Spider pour SRAM – WolfTooth Components


NOTE This is a CAMO Spider ONLY.  A CAMO Couronne is required to complete this system. This is a spider pour use with the SRAM cranksets that have a removable spiderThe CAMO Couronne system was created by the Wolf Tooth engineers pour Chainline And Material Optimization on direct mount style Couronnes. The key advantages include:Perfect chainline – pour wear and shifting precision Optimal material usage – pour weight, stiffness, and wear Price – pour less expensive replacement Couronnes Swapping – Very fast Couronne change out with 5 small bolts and no nuts. Availability – Wolf Tooth is the one-stop-shop pour your direct mount needs…round or oval, stainless or aluminum, and no matter the crankset. Bling!! – spider colors and bolt colors add a little flash to your sweet ride. Wolf Tooth’s patented Drop-Stop®  wide/narrow tooth profile pour the ultimate chain retention and mud shedding ability       CompatibilityThis spider is designed to work with the SRAM cranksets that have a removable spider. It also fits Cane Creek eeWing cranksets. 4 different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: M8 (minus 8mm – dished towards the frame) pour use with GXP cranks and BB30 Long Spindle standard 49mm chainline. Praxis Works Road/CX cranks use this offset. See the picture carousel pour how to measure your spindle length if you have BB30, or  click here to see that picture. This is pour use on bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.  Details here on the  148mm Boost spacing. M5 (minus 5mm – Boost) dished towards the frame) is pour 52mm chainline that Boost bikes may need.   Praxis Works mountain bike cranks use this offset pour DM-A Couronnes. Again,  this link explaining 148mm Boost spacing  will help you decide if you need the M5 or M8. M2 (minus 2mm – dished towards the frame) Is pour a 49mm chainline on a BB30 short spindle crankset. Praxis Works mountain bike cranks use this offset pour DM-B Couronnes.  See the picture carousel pour how to measure your spindle length if you have BB30, or  click here to see picture. P2 (plus 2mm – dished outwards away from the frame) pour fat bikes that have 190/197 rear spacing but use a 100mm spindle.  This is now very common on production fat bikes to keep the q-factor slimmer Can be used pour creating a “boost” chainline with a BB30 short spindle crankset  CAMO mounting bolts are included with each spider but can also be purchased separately in a variety of colors Chainline – varies by which  spider you choose.  See compatibility above. If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck. Installation notes: You will be able to access all bolts without removing the spider Line up the little dot on the ring with the dot on the spider.  Don’t worry, you cannot install the ring in the wrong rotational orientation. Be sure the bosses on the spider “plug in” to the Couronne. Torque bolts only to 4-5 Nm and use blue Loctite threadlocker Related Products  CAMO Couronne – elliptical or round and stainless or aluminum   Tech SpecsWeight: M8 • 32g |  M5 • 28g  |  M2 • 28g  |  P2 •  30g Material: 7075-T6 aluminum Included: ED coated steel bolts included Made in USA WARNING Handling this product will expose you to chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. pour further information go to​ Patent and trademark information

Ce produit n'est plus disponible !
Nous avons peut-être une alternative, contactez-nous au 0693472820

UGS : 4173 Catégories : , ,