ReMote22 Commande au Guidon pour Tige de Selle Téléscopique – WolfTooth Components

79

Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote.  Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar pour a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing pour smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad- but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here. High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended pour use with many cable-actuated dropper posts. See the compatibility section below pour details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. CompatibilityCompatible with all cable actuated dropper posts. Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. ReMote pour Magura is compatible with the 2-Vis clamp SRAM brakes that do not feature Matchmaker X clamps. ReMote pour Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Our ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to our ReMote base. More info about modification. Contact Wolf Tooth customer service pour other post compatibility questions. Mounting TypesReMote IS-AB pour Shimano I-Spec A or B – Includes IS-AB hardware ReMote IS-II forShimano I-Spec II – Includes IS-II hardware ReMote MMSRAM/Avid MatchMaker X -Includes the MatchMakerX hardware, which is a T-Nut and bolt that allowstheReMote MM to attach to the MatchMakerX clamp.You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased. ReMote 22.2mm – includes hinged handlebar clamp pour 22.2mm handlebars. All mountain bike handlebars are22.2mm where your shift and brake levers attacheven on 31.8mm handlebars.(31.8mm and 35mm handlebars just refer to the diameter where the stem clamps).Attach with 1-2nm max. ReMote 31.8is available pour road bikes where the ReMote is mounted next to the stem. ReMote Magura pour Magura brakes and some 2-Vis clamp SRAM brakes – Includes Magura hardware ReMote Hope pour Tech3 Hope Brakes – Includes Hope hardware (see compatibility above) ReMote IS-EV pour Shimano I-Spec EV – Includes IS-EV hardware                   Standard and Light Action ComparisonLever ComparisonRecommendations pour Specific Posts  Related ProductsReMote LA ReMote – Pièces de Rechange Tech SpecsWeight: Shimano IS-AB • 36g  |  Shimano IS-II • 35g  |  SRAM MM • 38.5g  |  22 (hinged clamp) • 38g  |  Magura • 36.5g |  Hope • 36g  |  Shimano IS-EV • 35g Material: 6061 T6 aluminum with Delrin axle Made in the USA WARNING Handling this product will expose you to chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. pour further information go to www.P65Warnings.ca.gov.​ Patent and trademark information

1 en stock